One bare bulb or a pair of flickering fluorescent shop lights is a poor match for a room where you climb ladders, use tools and park cars. Here's how to upgrade your garage to LED in one weekend.
Friday: look up
- 4 ft fluorescent shop lights in good shape? Keep them and convert them to LED tubes (Path A).
- Bare-bulb socket, or fixtures that are rusted, cracked or damp? Put up a sealed LED fixture (Path B).
Saturday morning: plan the layout
- Run 4 ft fixtures lengthwise over the sides of each parking spot, not over the car roof, where the car shades its own doors and wheels (Ross Light garage guide).
- Keep fixtures clear of the door track and the opener.
- Give the workbench its own light toward the front edge so you aren't working in your own shadow.
Choose 4500K (natural white) or 6500K (crisp, daylight-cool) and use it throughout. See LED color temperatures explained.
Saturday afternoon, Path A: convert
Orilis double-ended LED T8 tubes are 4 ft, 22W and about 3,000 lumens each. They run on 85-277V and come in 4500K, 5000K or 6500K. They're ballast bypass tubes: you remove the ballast and wire Line to one end and Neutral to the other through non-shunted sockets. The 4-light retrofit kit includes four tubes, eight non-shunted lamp holders, the wires and wire nuts. That's enough for two 2-tube shop lights or one 4-tube fixture. Our conversion guide walks through it step by step.
Saturday afternoon, Path B: go sealed
Garages collect humidity and dust, especially in Florida. Orilis vapor tight LED fixtures are gasketed and rated IP65, with integrated LEDs, so there are no tubes or ballast to replace. They come in 2 ft (36W) and 4 ft (72W), each in 4500K or 6500K, and they're hardwired (Line, Neutral and Ground). More in what is a vapor tight light fixture?
Skip the screw-in outlet adapter and stapled cord. The electrical code doesn't allow flexible cords as a substitute for fixed wiring or fastened to building surfaces.
Sunday: finish and test
Label each converted fixture "LED only, no fluorescent tubes." Then check the garage after dark with the door open and the car parked inside.
Safety first: turn the power off at the breaker and confirm it's off with a voltage tester before you open any fixture or ceiling box. If you're not comfortable with line-voltage wiring, hire a licensed electrician. See do I need an electrician?
Ready to light up your garage?
Shop double-ended LED tubes, the 4-light retrofit kit or vapor tight fixtures at orilis.com, email info@orilis.com or call 1-407-900-9745.
